Gold Processing Equipment

Shaking Tables for Gold

Approx Price: Rs 1.5 Lakh / Unit 
Minimum Order Quantity: 01 Unit
Shaking Tables : The shaking table for gold is one of the effective ways of separating gold from sand.

Construction

Head Motion:

The head motion is of rugged construction and requires minimum maintenance. Its internal mechanism is splash lubricated from an integral oil sump.

Decks:

The decks are built of 16mm zircon-reinforced fibreglass with fabricated steel frames at the bottom and are easy to clean, requiring little maintenance. The specific gravity of fibreglass made into decks is one third of that of steel, while its strength reaches as high as 70% that of steel. This fibreglass desks also has the characteristic of water-resistance and corrosion -resistance and can hold the shape unchangeable at ±50°C.

Applications:

Concentrating Tables are designed to wet gravity based separation of minerals and other granular materials. There are many applications where the concentrating table is of particular value and cannot be equalled for economical and efficient performance. They are effective in processing precious and base metal, rare metal and non-metallic minerals.

Gold Concentrator

Approx Price: Rs 1.2 Lakh / Unit 
Gold Concentartor :

STAR TRACE Gold concentrator is a kind of centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings. Since 1985, three models have been developed. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having milling size of 0.074mm,the recovery for the natural gold is expected up to 98%. For that natural gold of 0.004mm in particle size. The recovery is 97%. The cleaning up cycle is 1~4 hours. And the upgrade ratio is up to 1,000 times.

Features :

  • High concentrating ratio and high recovery.
  • Total process automation, steady recovery performance.
  • Centre discharges design for fast, secure concentrate removal.
  • Environmentally friendly (requires no chemical additives or reagents).
  • Low water and electricity requirements.
  • Low production costs, durable wear parts, minimal maintenance requirements.
  • Compact design requiring less space, easy merged into the existing mining processing.
  • Quick pay back on investment, typically less than half year.

Process Description :

The STAR TRACE Concentrator is specifically designed for recovery of free, metallic gold, platinum or silver from hard rock circuits and is also an ideal technology for alluvial gold including secondary. Recovery from sand and gravel operations.The STAR TRACE Concentrator subjects the material Being processed to a centrifugal field of up to 60G ’s which allows recovery of finer native metals than with conventional gravity concentration equipment. Periodically, the high grade concentrate is removed from the concentrate cone during the rinse cycle. The rinse cycle time is typically less than 20 minutes per cycle. Optimum operating cycles will range from 1hr to 4hrs.Feed is screened at approximately 2-4mm depending on the application, introduced as slurry through the central vertical feed pipe and accelerated by the rotor. Rapid stratification according to specific gravity occurs as the material is driven up the grid concentrate cone wall under the influence of an immense gravity field. Fluidization water is injected through the rotor wall to create a dilated or fluidized bed. The high specific gravity gold or other target particles become embedded in this zone and are retained here until the machine is stopped and the concentrate is rinsed down through the concentrate discharge ports. A centrally located rinse manifold directs jets of water to thoroughly rinse concentrate from the retention zone after each operating cycle.

How does STAR TRACE Concentrator Work:

  • Fluidization water is introduced into the concentrate cone through a series of fluidization holes.
  • Feed slurry is then introduced through the stationary feed tube and into the concentrate cone. When the slurry reaches the bottom of the cone it is forced out ward and up the cone wall under the influence of centrifugal force.
  • The slurry fills searching to capacity to create a concentrating bed. Compaction of the concentrating bed is prevented by fluidization process.
  • The flow of water that is injected into the rings is controlled to achieve optimum bed fluidization. High specific gravity particles are captured and retained in the concentrating cone.
  • Upon conclusion of the concentrate cycle, concentrates are flushed from the cone into the concentrate a under through port.

Gyratory Crushers

Approx Price: Rs 4.5 Lakh / Unit 
Gyratory Crushers For Gold:

Gyratory crusher is a large crushing machinery, using the gyratory sports in casing cone cavity of crushing cone to produce extrusion, fracturing and bending role to materials for crushing ore or rock of various hardness. Gyratory crusher is composed of transmission, engine base, eccentric bushing, crushing cone, center frame body, beams, original dynamic part, oil cylinder, pulley , appliances and dry oil, thin oil lubrication system components etc.

Gyratory Crusher Applications:

Gyratory crusher is one of the main equipments for primary crushing ores or rocks on metallurgy, building material, chemical industry and hydro power etc. industrial sectors.

Slurry Pumps

Approx Price: Rs 45,000 / Unit 
The slurry pumps are widely used in mining, steel  and glass industries & Star trace is one of the most well recognized manufacturers of: heavy duty slurry medium duty slurry process pumps vertical slurry pumps ash Slurry Pumps. Our company manufacturers advanced slurry pumps and process pumps. Our pump handle tougher abrasive solids and slurry found in mining, steel, glass industries and can also be used in gold processing.

STAR TRACE is one of the most well recognized manufacturers of:

  • Heavy duty slurry
  • Medium duty slurry
  • Process pumps
  • Vertical slurry pumps
  • Ash slurry pumps

Our company manufacturers advanced slurry pumps and process pumps. Our pump handle tougher abrasive solids and slurry found in mining, steel, glass industries and can also be used in gold processing.

Gold Electrowinning Equipment

Approx Price: Rs 4.5 Lakh / Unit 
Electro-winnings also called electro-extraction is the electro-deposition of metals from their ores that have been put in solution or liquefied.

Features:
  • In electrowinning, a current is passed from an inert anode through a liquid leach solution containing the metal. So that the metal is extracted as it is deposited in an electroplating process onto the cathode.
  • In electrorefining, the anodes consist of unrefined impure metal and as the current passes through the acidic electrolyte.
  • The anodes are corroded into the solution so that the electroplating process deposits refined pure metal onto the cathodes.

Ball Mill for Gold

Approx Price: Rs 1.2 Lakh / Unit 
Ball Mill :

Ball Mill for gold is  a type of grinder. It is a cylindrical device used in grinding (or mixing) materials like ores, chemicals, ceramic raw materials and paints. Ball Mills rotate around a horizontal axis, partially filled with the material to be ground plus the grinding medium. Different materials are used as media, including ceramic balls, flint pebbles and stainless steel balls. An internal cascading effect reduces the material to a fine powder.Industrial ball mills can operate continuously fed at one end and discharged at the other end. Large to medium-sized ball mills are mechanically rotated on their axis but small ones normally consist of a cylindrical capped container that sits on two drive shafts (pulleys and belts are used to transmit rotary motion).

Grizzly Feeders

Approx Price: Rs 1.4 Lakh / Unit 
Grizzlly Feeders for Gold:

Grizzlly Feeder:

The grizzly feeder is suitable to feed primary jaw crushers, selecting the large sizes which require primary crushing, the smaller sizes, and any fines which must be eventually rejected. The grizzly vibro feeder consists of a very large vibrating body made of thick plate, with inside lining of anti-abrasive plate. The grizzly vibro feeder is driven by two or four vibrating motors. The vibro feeder which may either be placed on a steel or concrete base rest on springs.

Side Mounted Vibro Motor Type

Boosting Throughout of Primary Crushers:

A robustly constructed range of vibratory machines extending from units 0.5m wide x 2m long up to units 1.5m x 4.5m. The grizzly feeders are intended primarily for use ahead of primary crushers and are designed to handle large run-of-quarry stone, take the impact of dumped loads and smooth out the flow of material to the crusher. All models of grizzly vibro feeders have a flat reinforced impact area followed by a sloping grizzly bar section. The longer grizzly feeders are fitted with two stepped, grizzly bar sets. replaceable wear sections of mild steel, manganese steel or rubber are fitted depending on the duty specified.

Belt Conveyors for Gold

Approx Price: Rs 65,000 / Unit 
Belt Conveyors

Star trace manufactures Belt conveyors for gold and we  take pleasure to introduce ourself as one of the top most manufacturing, exporting and supplying units of belt conveyors based in India. Designed to perfection, these belt conveyors are widely used in diverse industrial applications. We make use of good quality raw materials for manufacturing of these belt conveyors. Thus our belt conveyors provide reliable performance and are very durable too. made available in varied specifications, these belt conveyors are very affordable.

Applications: e-waste recycling plant mining metallurgy coal industries.

Grizzly Feeders for Gold

Approx Price: Rs 1.3 Lakh / Unit 
Grizlly Feeder:

The grizzly feeder is suitable to feed primary jaw crushers, selecting the large sizes which require primary crushing, the smaller sizes, and any fines which must be eventually rejected. The grizzly vibro feeder consists of a very large vibrating body made of thick plate, with inside lining of anti-abrasive plate. The grizzly vibro feeder is driven by two or four vibrating motors. The vibro feeder which may either be placed on a steel or concrete base rest on springs.

Side Mounted Vibro Motor Type

Boosting Throughout of Primary Crushers:

A robustly constructed range of vibratory machines extending from units 0.5m wide x 2m long up to units 1.5m x 4.5m. The grizzly feeders are intended primarily for use ahead of primary crushers and are designed to handle large run-of-quarry stone, take the impact of dumped loads and smooth out the flow of material to the crusher. All models of grizzly vibro feeders have a flat reinforced impact area followed by a sloping grizzly bar section. The longer grizzly feeders are fitted with two stepped, grizzly bar sets. replaceable wear sections of mild steel, manganese steel or rubber are fitted depending on the duty specified.

Spiral Separators for Gold

Approx Price: Rs 98,000 / Unit 
Spiral Separators:

Spiral separators for gold are gravity concentrators and separate minerals of different specific gravity according to their relative movement in response to gravity, centrifugal force and other forces in the fluid medium. It has extremely good performance and effects in processing placer of beach, riverside, seashore and stream.star trace spirals are made of polyurethane lined fibre glass with wearable corundum inner surface. Generally there are 5 turns in one start, single, twin, triple and quad starts available per column to suit capacity requirements.

Applications: Rutile, ilmenite and zircon concentration, iron ore, chromite and manganese beneficiation, tin, tantalum and ore concentration, gold, native copper and base metal recovery, silica sands processing, titano-magnetite concentration.

Gold Mineral Jig

Approx Price: Rs 98,000 / Unit 
Mineral Jig :

Theory of Operation:
The in-line pressure Mineral jig for gold is unique in its design and use of jigging concepts. The unit is fully encapsulated and pressurised and combines a circular bed with a moveable sieve action. The encapsulation allows the stpl to be completely filled with slurry and water.

Applications:

Star trace pressure jig is a high yield, high recovery gravity separation device. It has been successfully installed in both alluvial and hard rock applications. significant advantages have been achieved in grinding circuits where coarse heavy minerals or waste material have been recovered for preferential treatment prior to over grinding.

The mineral jig operated to recover free gold, sulphides, native copper, native silver, tin/tantalum, diamonds and garnet. installations are also planned for coal, lead re-mediation, magnetite, mineral sands and iron ore recovery. Typically units are installed in the recirculating load with stpl feed consisting of up to 14mm mill discharge or cyclone underflow.

Hydrocyclone for Gold

Approx Price: Rs 98,000 / Unit 
Hydrocyclone for gold is  widely applied in mine-chosen technique in various metal mines. it mainly shows in the following works: classification for closed circuit grinding. Regrinding for fine mine classification. Mud-removing before selection and after selection, dam and backfill for gangue. In closed circuit grinding system, it features high classification efficiency and fine overfall fineness under high mine concentration. Classification efficiency is higher for 5-10% than common screw grader. It benefits for enhancing grader utilizing choose proper specification and mode of cyclone according to grinding processing capacity, overfall fineness and sedimentation concentration. This is precondition of getting the most optimized work condition. Star trace is able to offer standalone, parallel connection machine or machine series in such 

specifications as ø50, ø75, ø100, ø125, ø150, ø200, ø300, ø350, ø500, ø660.

Vibrating Feeders for Gold

Approx Price: Rs 1.4 Lakh / Unit 
STAR TRACE vibratory feeder for gold is powered by heavy–duty Vibro motor.It is a high frequency reciprocating machine of heavy duty capable on conveying bulk material from storage to processing or between processes at a continuous controlled rate of flow. Thus Vibrating feeders are used in processing industries for handling all types of materials such as hot, damp, lumps, dusty or abrasive for various functions like flow of material from storage, proportioning blending, packaging, mixing, weighing, sprinkling, screening, scalping, crushing, washing, drying, heating, cooling, dusting, spreading, batching and etc.

Gold Jaw Crusher

Approx Price: Rs 1.5 Lakh / Unit 
Jaw Crusher for Gold

Jaw crusher the crushing chamber of jaw crusher is composited by stationary jaw and movable jaw.the crushing work simulates the movement of animals which use two jaw crushers to crush materials. Jaw crusher is widely used in quarry, mining, metallurgy industry, building material, highway, railway and chemical industry etc. The largest compression resistance of the material to be crushed is 320m pa. It is ideal for the primary crushing. It features high reduction ratio, easy operation, simple construction, repeatable performance, easy maintenance and low consumption.

Dewatering Screen for Gold

Approx Price: Rs 1.3 Lakh / Unit 
dewatering screen:

Dewatering Screen for gold is on of the celebrated equipment. Whilst enjoying immense popularity for many years on small horizontal and inclined screens, star trace is the first company in the India to perfect this simple drive arrangement on large horizontal and inclined screens. This single development has resulted in tremendous advantages as far as reduced maintenance, compactness and simplicity are concerned. Besides the simplicity of the drive, many other features have been incorporated to provide a machine which is specifically designed for heavy duty applications, long life and low operating and maintenance costs at a competitive price. the standard range of screens from 300x900 mm to 3000x9000 mm in single and multi-deck configuration.

Cone Crusher for Gold

Approx Price: Rs 3.5 Lakh / Unit 
Cone Crusher

STAR TRACE Cone Crusher adopts the international advanced techniques to develop this equipment. The design of spring cone crushers structure is distinguish from traditional design and it compiles other advantage of various type of cone crusher. So it is applicable to fine crush of superfine crush various ores, rocks, slag and refectories. To adopt the techniques of concave and mantle after machining process to connector with cone surface to instead the anciently complicate techniques, Star Trace cone crusher raise efficiency in rock crushing.It has overload hydraulic cavity and refrigeration lubricating system, which fully ensure the safety and stability of operation. It is widely used in metallurgical mining, architectural, rock & railway etc.
Looking for Gold Processing Equipment ?
© Star Trace Private Limited
 
Desktop Site Back to top